How to connect and set the BMW INPA K+DCAN USB interface for BMW ISTA Rheingold?

How to connect and set the BMW INPA K+DCAN USB interface for BMW ISTA Rheingold?

• • Step 1:
    1. 1. Connect the INPA K+DCAN cable to the laptop or PC, then install the driver program. Next open “Device Manager”, open “USB Serial Port(COM3)” attributes, choose “Port Setting” and “advanced…”
    1. 1. Set COM Port to 9, Set the delay timer to 1, and click “OK”

• • Step 2:
    1. 1. Open C: /EDIABAS/BIN/EDIABAS.INI. with notepad,check“Interace = STD:OBD”.
    1. 1. Set “TCP Port=6801”
    1. 1. Open C: /EDIABAS/BIN/OBD.INI, check“OBD Port=COM9”

• • Step 3:
    1. 1. Connect car and laptop with INPA K+DCAN cable, run BMW ISTA software, click setting
    1. 1. Choose“VCI Coding” and “Ediabas standard settings(ediabas.ini)”， then click ok
    1. 1. Back to the main menu, then click operate, choose read car data, click complete

• • Now waiting for the vehicle recognition process

This is to connect the INPA cable with BMW ISTA. There is no problem with the test in this guide, but it will not be responsible for any potential loss or damage.

Request for BMW Remote Support